TINING PREP FOR LEADING

Posted by JOE HUGH on July 27, 1997 at 23:00:21

My '28 tudor gas tank has rust pits completely thru in the weld area where the windshield frame rests on the tank.I have carefully sandblasted these pits and then used muriatic acid in prepartion for leading.I am having trouble tining down inside the pits.You can't sand down into them; you need some kind of chemical treatment.I rinse off the muriatic, then applly the liquid solder flux; it doesn't work that well.I want it to flow on like it does with copper and brass.Any help is greatly appreciated.

Follow Ups:
Re: TINING PREP FOR LEADING mike Flanagan July 30, 1997 at 00:35:29(1)
Re: TINING PREP FOR LEADING JOE HUGH August 03, 1997 at 20:36:13(0)
Re: TINING PREP FOR LEADING DJ. Voyce July 29, 1997 at 07:57:09(1)
Re: TINING PREP FOR LEADING joe hugh August 03, 1997 at 20:38:58(0)
Re: TINING PREP FOR LEADING Jim Miller July 28, 1997 at 16:19:38(1)
Re: TINING PREP FOR LEADING joe hugh August 03, 1997 at 20:42:05(0)
Re: TINING PREP FOR LEADING jim mason July 27, 1997 at 23:35:22(1)
Re: TINING PREP FOR LEADING Joe Hugh August 03, 1997 at 20:44:40(0)

E-Mail Comment to Webmaster