Posted by Michael D on August 27, 1998 at 07:51:03
I have just sandblasted and prime coated my '30 frame, and my inspections show that the driver's side has saggged approx. 3/4".A straight edge shows where the siderail needs to be fixed. I have an article showing a frame being straightened with a jack, log chains and steel rails.I think I'm going to give this a try, but would appreciate some advice from those that have done this before. I want to get a really straight frame, and I'm not sure that letting a body shop do the job may be the way to go. Thanks for any advice, Michael D |
Follow Ups:
|