Re: Frame Straightening

Posted by Marco on August 27, 1998 at 11:09:43

In Reply to: Frame Straightening
posted by Michael D on August 27, 1998 at 07:51:03

Bob's right!Under normal wear and tear the frame sags at the RIGHT rear motor mount from the torque of the engine.Since you have a bigger problem on the left side there must be damage from outside forces.You should therefore be sure to check for square as Bob suggested.I place bolts in holes near the four corners of the frame and criss-cross with fishing line.Be sure to tie the string off symetrically opposite from right to left sides to get a proper reading.