Posted by Jim on May 21, 1998 at 17:35:57
In Reply to: Re: Hinge pins
posted by Glen Weilbaker on May 20, 1998 at 15:11:40
How about removing the doors at where the hinges are screwed to the body posts? ========================= This is plan C.The lower bolts are pretty rusty and would have to be cut or drilled out.I also wanted to try to avoidhaving to re-aligning the door and (if I got the hinge pins out) would really like to put in a hinge pin mirror. Plan B was to come up with some sort of puller like Carla suggested.Plan A was something simpler that, although I hadn't thought of it yet, I was hoping someone else had.-- Jim |
Follow Ups:
|