Posted by Jim on May 22, 1998 at 08:34:50
In Reply to: Re:Removing hinge screws
posted by Bob Johnson on May 21, 1998 at 19:03:09
OK.Now down to only 2 plans.Plan A is to try a mega "C" clamp as press.However, I won't be too bummed if this doesn't work because I am in New England and figure that the rust has done a pretty thorough job of seizing the pin in place. Plan B is to remove the hinge screws from the post.If the pins are going to be as much trouble as I have heard, re-aligning the door will be relatively simple.And to heck with hinge-pin mirrors.I'll go with the clamp-on style! Thanks for all the input.-- Jim |