Posted by Bob Carabbio on August 09, 1998 at 00:09:25
In Reply to: Water Pump Lubrication
posted by Jim McKee on August 08, 1998 at 23:27:22
You can get an alemite adapter from any of the supply houses to work on the conical fittings. The water pump should use waterPROOF grease if it's a stocker. This because the cooling fluid isn't sealed from the bushing, and you don't want the grease to get washed out. In my case since I'm interested in a driver, I've replaced ALL the fittings with zerks. |
Follow Ups:
|