Posted by Kevin Daly on August 13, 1998 at 11:14:40
In Reply to: Re: What a Drip!
posted by Glen Weilbaker on August 13, 1998 at 07:08:57
Hey GW, Thanks for the awesome advice.I would have never thought of isolating the lower casting like that."Pretty Slick"I had to shim my replacement cap jet with 2 extra gasket washers for it to reach the proper height within the venturi.If the leak isn't the neoprenene tipped valve, I would suspect it is the threads of the cap jet seeping by.I'll be trouble shooting the system soon enough. Thanks again, Kevin Daly |
Follow Ups:
|