Re: What a Drip!

Posted by David Dewey on August 13, 1998 at 11:38:35

In Reply to: Re: What a Drip!
posted by Kevin Daly on August 13, 1998 at 11:14:40

Hi,
Another thing to look for is a leaky jet. Repros are notorious for this, the pressed in tube doesn't always stay 'fuel tight' and originals sometimes develop stress cracks. I run a little bead of solder around the top of the hex base to insure there are no leaks. The main jet that screws in from the bottom canalso have this problem, but you have to be careful to have just enough solder to seal, yet still allow it to pass through the threaded hole.
Carb. shouldn't leak even w/ valve on.
David D.



Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam