Request for Info on good reproduction Fan Blade

Posted by Mark Gordon on May 28, 1997 at 10:44:25

After a successful ride through the Memorial Day parade with our 1930 Deluxe Town Sedan, one side of our fan blade broke off, denting the inside of the hood and fender on its way out.We were able to drive the short distance home by cutting off the other side of the fan in order to balance the water pump pulley. I am not sure if this was an original or a reproduction fan blade.However, I have read that some steel repro fan blades are prone to breaking.I have also seen that Obsolete Ford Parts sells an aluminum reproduction fan blade. Does anyone out there have any information on this topic or a recommendation on a good reproduction fan blade?

Follow Ups: Re: Request for Info on good reproduction Fan Blade Dave Sturges May 28, 1997 at 16:37:53(0) Re: Request for Info on good reproduction Fan Blade doug Linden May 28, 1997 at 15:19:07(0) Re: Request for Info on good reproduction Fan Blade mike May 28, 1997 at 12:13:30(1) Re: Request for Info on good reproduction Fan Blade Jim McPherson May 28, 1997 at 22:06:36(0)

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam