Posted by richard inzana on Oct. 29, 1998 at 15:13:39
In Reply to: Re: Model 'A' Shocks
posted by Ray C on Oct. 27, 1998 at 14:58:41
: Hi again Richard, : The shocks should not leak if you turn the needle valve. : Ok so here is another way that I think you can use to check which shock goes where. If you were looking at the front of the shock (looking at the needle valve)with the mounting holes on a horizontal plane, (the mounting holes are above center) the fill plug is to RIGHT of center or the vertical plane on the shock that goes on the RIGHT rear. The other shock which is configured that way goes on the LEFT front. If that is confusing, let me know. : Ray Hi Ray, |