Re: Bumper Height Confused!!

Posted by Don Elson on August 10, 1998 at 14:21:16

In Reply to: Re: Bumper Height
posted by Marco on August 10, 1998 at 00:39:41

You state 19 11/16" while Rick said 18 11/16".Please clarify.My frame horns measure 17 1/4".Also, is the rear bumper this same height as the front?If not, what is the correct height?

I read all of your responses on this board. They are greatly appreciated.
Thanks,
Don

: Don,

: As Rick mentioned, the original spec was 19-11/16" to the center of the bumper.With original tires, previously unused front spring, frame, and bumper arms, my Roadster measured exactly that (to my surprise).There are variables however in modern tires, replacement front springs, etc.If you have Firestone tires for example the height would likely be increased by about 1/2".

: I took a measurement from the floor to the lowest point of the front frame horn and came up with 17-


Follow Ups:



Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam