Re: Axles & King Pins

Posted by Mike Smith on May 11, 1998 at 13:54:40

In Reply to: Re: Axles & King Pins
posted by H. L. Chauvin on May 10, 1998 at 17:05:25

: Hi Roger,If I read you correctly, the brass shims you describe may actually be the original bushings made for the axle, 2 per axle.
Henry, Out of interest and to try and renew my knowledge of the A, I took a look at two axle beams today in my scrap heap and cannot see any bushes fitted into the "eye". I am genuinely interested in this and to that extent also spent a goodly time searching a parts book without success. Are you correct and if so what was the part number for these? As Carla suggests are you possibly misunderstanding Roger? You do however say that there are two bushes per axle as against four king pin bushes per axle.

Follow Ups:
Re: Axles & King Pins & Spindles H. L. Chauvin May 11, 1998 at 23:03:51(0)

E-Mail Comment to Webmaster