Re: Two clutching questions

Posted by Bob Carabbio on March 29, 1998 at 21:43:24

In Reply to: Two clutching questions
posted by M RR on March 29, 1998 at 21:21:54

You can use the clutch from a flathead V8 - generally the late '40s variety.
You need, however to machine off the rear of the flywheel until it's flush with the pressure surface, and re-drill the flywheel for the six bolts that hold the V8 pressure plate.
There are a lot of them in the Dallas club - it's generally done because the pedal effort is much lower than it is for the Stocker, and the engagement tends to be smoother.

E-Mail Comment to Webmaster