Re: Cooling Fan Options

Posted by Glen Weilbaker on March 25, 1998 at 12:04:06

In Reply to: Cooling Fan Options
posted by Glen Weilbaker on March 19, 1998 at 10:14:37

Here's what I'm going with, the aluminum two blade, check it for taper, and balance. I have a 31' and it looks like there is plenty of clearance with the current fan and rad inlet so hopefully it doesn't have to be cut, something to watch for. And the 160 thermostat with the stainless sleeve.
Thank you for your comments,
Glen

Follow Ups:
Re: Cooling Fan Options Marco March 25, 1998 at 14:28:27(0)

E-Mail Comment to Webmaster