Re: Model A engine fan

Posted by Bruce Wheeler on March 18, 1998 at 15:15:15

In Reply to: Re: Model A engine fan
posted by Larry Jenkins on March 18, 1998 at 14:46:51


: Should have included in my first note that it is a B waterpump on a B engine with a C head.The pump is bolted to the head with three bolts. Two on the bottom front, and one on the top rear.Still think I can remove the pump without tilting the radiator?


I just replaced the water pump on my 31 that has a four blade fan last weekend.Tilting the radiator all the way against the headlight bar still did not allow enough room for the 4 blade fan and waterpump to come off.I had to undo the bolts of the headlight bar and let it rest on the front of the fender.It gave me the extra inch or so I needed to remove the assembly.The four blade fans can't be turned like a two blade fan to get it out because the extra blades hit the radiator.

: Larry Jenkins




Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam