Posted by Tim Wildey on March 06, 1998 at 21:36:03
Today I installed new points and condenser on my modern upper distributor plate. I removed the timing pin and rolated it into the opening. While hand cranking the engine a friend held the pin in place. We never found the dimple to find TDC.Then I remembered the previous owner stating that he replaced the timing gear. I looked in Bratton's Parts catalog and noticed a note to enlarge the new gear dimple to 5/16".I am thinking about removing the timing gear cover to located the dimple.I have also heard of a way to find TDC by placing paper in all spark plug holes then crank the engine.The paper in Spark Plug #1 will pop-out in TDC and make sure it is the compression stroke ?? Open to Any Ideas, |
Follow Ups:
|