Re: how to fasten the distributor

Posted by Bob Johnson on January 27, 1997 at 18:08:46

In Reply to: how to fasten the distributor
posted by MIKE on January 27, 1997 at 16:54:46

Mike,
There should be a screw with a lock nut on the block that holds the distrbutor in place. It is located on the side of the block in line with the distrbutor. If tightening the screw does not help you might have to replace the screw. If you do not have the lock nut then that is your problem.
Bob

Follow Ups:
Re: how to fasten the distributor Ward D February 22, 1997 at 12:25:13(0)

E-Mail Comment to Webmaster