Posted by Paul on February 14, 1998 at 16:52:25
In Reply to: Light Switch Problem
posted by Mike on February 14, 1998 at 16:03:41
: I installed a new headlight wiring loom.The loom had a new contact plate and spring loaded center contact (horn).When I turn the switch to the right (counter clockwise) the horn sounds.I suspect that the spring on the contact plate is shorting.Has anyone had this happen?Have considered putting a plastic sleeve around the spring and contacts to keep it from shorting.I did get some success by filing the solder flat on the spring side contact.Any suggestions? : Thanks Yeh! Mike, I've had the problem as you described..Fixed it just like you suggest.Had some other problems with it too.Won't go into it unless you have questions. Good ole reproduction parts!!!!! |