Light Switch Problem

Posted by Mike on February 14, 1998 at 16:03:41

I installed a new headlight wiring loom.The loom had a new contact plate and spring loaded center contact (horn).When I turn the switch to the right (counter clockwise) the horn sounds.I suspect that the spring on the contact plate is shorting.Has anyone had this happen?Have considered putting a plastic sleeve around the spring and contacts to keep it from shorting.I did get some success by filing the solder flat on the spring side contact.Any suggestions?
Thanks

Follow Ups:



Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam