Re: Steering problem

Posted by MRR on January 02, 1998 at 08:28:27

In Reply to: Steering problem
posted by Mike Darling on December 30, 1997 at 09:45:50

Yo Mike!Been there done that.1.5 inches of play in a 7 toother should be considered on target.I spent about $300 refining the fit of mine and still have about that much.It's better than the quarter turn I started with though.One thing of note is that although the bearings look very similar, the spindle bearings are not exactly the same as the steering shaft bearings.If you are going to take it apart (I would leave it alone) you should get the specific bearing for the shaft.I have a set of A 3571-AR bearings that are the correct for your box in case you need it.E-mail me for more info on 7 tooth rebuilds if you need it.

Follow Ups:



Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam