Re: Multiple disk dry clutch

Posted by Rick on March 31, 1997 at 19:08:03

In Reply to: Multiple disk dry clutch
posted by Rob Kane on March 30, 1997 at 06:26:41

I have a multi in my 28 truck which seems to work ok.The main
problem I encountered with my clutch is that grooves wear into
the casting perpendicular to the main grooves which eventualy
causes problems with proper operation.This was so with the
orig. flywheel in my vehicle necetating getting a replacement.
A change of transmission will also req. another tranny case if
nothing else since the top two bolt holes are slightly wider
apart on the newer style.The clutch plates are similar to Ts
and motorcycles so I am sure someone should be able to help
you.

E-Mail Comment to Webmaster