Re: Door hinge pin removal

Posted by Larry Jenkins on March 06, 1997 at 12:17:06

In Reply to: Door hinge pin removal
posted by Ed Greany on March 06, 1997 at 00:50:36

Both Bobs gave you excellent ideas to remove your stubborn pins.The pins on my coupe were a little worn, so mine came out with a punch and hammer.I replaced mine with stainless pins made out of long bolts, rounding and polishing the heads, and cutting them off to the original pin length.If you do this, you may have to ream out the pin holes to take the newer bolt size.I don't think stainless will have the affinity for binding in the pin holes.

E-Mail Comment to Webmaster