Re: 1930 hubcaps

Posted by John Icenhower on August 02, 1998 at 21:12:18

In Reply to: 1930 hubcaps
posted by Dave Usavage on August 02, 1998 at 17:57:18

: Just wondering.....Do I have to take the wheels of the car ('30 tudor) to get the hubcaps on properly? It seems like the only way, but I thought I'd seek help before doing it. Thanks millions for your help.

Dave,
You don't HAVE to but it the best way.In fact, to make sure the hub caps stay on, put the caps on and bend only three or four of the tabs further around the edge from the inside.You don't really need to remove the caps for anything so this will make them secure.Don't bend all the tabs as you may need them later and don't want to bend them back and forth too much as they will break off from too much bending.
John




Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam