Re: Wiring Harness Routing?

Posted by Glen Weilbaker on July 29, 1998 at 10:03:26

In Reply to: Wiring Harness Routing?
posted by Kevin Daly on July 29, 1998 at 09:28:39

: Hi Folks,
: Here's a quicky for you!My wiring harness was installed by its previous owner in a very sloppy fashion.I'm trying to route the harness properly along the drivers side frame in the engine compartment.I have no problems going to the lights or horn and I'm aware of the clip on the hood hold down to keep the harness away from the engine pans.The question is in the area of the steering box. Does the wiring harness route:
: 1) Inside the frame over the top of the sector gear housing?
: 2) Inside the frame under the sector gear housing?
: 3) Around the back of the installed steering box?
: I'm assuming that the answer is #1, but I'd like your opinions on the options.Thanks in advance for the help.
: Kevin Daly
#1 seems to be logical incase the sector leaks oil the wires won't be affected.
GW

E-Mail Comment to Webmaster