Posted by Jim Beley on July 09, 1998 at 10:46:23
In Reply to: AA engine problems
posted by Ken Manninen on July 05, 1998 at 07:15:36
Hi Ken, Your symptoms sounded just like mine except the engine stopping. Trucks had a problem with the universal joint at the end of the short drive shaft hitting the cap due to not enough clearance! This makes a loud clunk-clunk-clunk noise that comes and goes just as you described. Mine sounded like it was coming from the rear of the engine but was really farther back. The fix was a shim provided by Ford and described in the Service Bulletins. THis shim provides for more clearance between the u-joint knuckle and the u-joint cap. Good news is it is available from the Model A Works (owned by Tom Godish) in Portland OR. Call him and leave a message and request his catalog too. He has lots of AAnew parts. Hope this does the trick for you. |