Posted by GW on May 18, 1998 at 11:16:30
In Reply to: Verification for Glen - Steering
posted by Frank on May 18, 1998 at 10:25:51
: Glen:Could you please verify that I understand the concept of the adjustments to the steering box. I'm looking at the Model A Ford Service Bulletin - Complete(Yellow)book. YEP. Hopefully, we will be singing out of the same book.I'm on bulleting page 318(New Steering Gear) and page 99 of the book. pertaining to 2 tooth sector adjustments.If this is the wrong place, please let me know. : 2. Here's where I become confused about the process. Page 99 of the book, bottom right corner, it says "First see that housing cover nuts(see Fig 638) are securely tightened." Now, if I understand what you are saying, I am to loosen these nuts to do the eccentric adjustment.Are we talking different nuts or what? : 3. I further assume that the Worm Adjusting Screw is only to place down pressure on the Worm Gear. Am I correct? Yes, here's another tip, make sure cup that the screw goes to is positioned to accept the screw. Just pull the screw and look, should be a "dimple" if it looks smooth the cup could be rotated, for some reason I've came across this a couple times. Not a bother, I have to remember to grab the book in the morning, and hopefully you'll be driving your lady and not crazy! |
Follow Ups:
|