Re: 1928 multiple disk clutch

Posted by Ted Koudys on May 16, 1998 at 22:20:58

In Reply to: 1928 multiple disk clutch
posted by steveg on May 14, 1998 at 23:43:47

Before rebuilding your multidisc clutch check the internal teeth/splines of your flywheel are in good shape,i.e,no grooves or ridges that would prevent the external toothed discs from sliding.This would prevent smooth action of the clutch.This area of the flywheel is usually worn.The answer is usually to replace the clutch with the single plate style,but you then have to change the input shaft of your transmission too.Ted



Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam