Re: Groves in cylander walls

Posted by Dave Sturges on April 20, 1998 at 10:17:08

In Reply to: Re: Groves in cylander walls
posted by DJ.Voyce on April 20, 1998 at 01:05:15

Gary,
In addition to what D.J. has already sent. If the engine has already been bored, you might be able to tell how much by looking at the top of the pistons. Sometimes the oversize is stamped into the top. You may have to scrap some carbon from the tops to locate the size stamp.
Dave

E-Mail Comment to Webmaster