Posted by Rainer Kallas on March 21, 1998 at 08:12:33
In Reply to: float setting - tillotson carb
posted by Paul I Erickson on May 11, 1997 at 06:09:48
: What is the proper float setting for a tillotson carb.I installed a carburator kit and the instructions indicated a 1" drop from the housing to the center line on the float when turned upside down.Problem - I don't have a centerline on the float that runs horizontal, its vertical.Also, the Zenith has a 5/8' drop.I'm not sure I believe the 1" drop is correct for the Tillotson. |