Re: flywheel

Posted by John Icenhower on March 19, 1998 at 22:56:55

In Reply to: flywheel
posted by jim on March 19, 1998 at 14:14:15

: I am getting ready to install a clutch and have noticed that my flywheel has small hairline cracks on the clutch surface, will it be ok to use this way or will there be a problem.
: thank you for your help, jim corliss
Jim,
I don't like cracks, hairline or otherwise in any piece and especially in one that is going to rotate at 2200 RPM just below my feet.I would have the flywheel resurfaced and be sure that the step between the clutch facing and the pressure plate face is maintained.
John

E-Mail Comment to Webmaster