Need 155-C measurements

Posted by Jeff on March 19, 1998 at 21:08:34

Thanks for helping.
I'm installing new wood in a 30 Murray Town Sedan and need some measurements to make sure I'm square. (yes, hindsight says I should have done this before disassembly, but alas...)
1. Width from left rear door hinge post to right door hinge post.Outside measurement would be most helpful.Open both doors to get this.Measurement at top and at bottom if seat will allow.
2.Open same side front and rear doors.Measurement from hinge post screw of front door to that of back door at top and bottom (bottom will be at bottom of curve where meets sill).Go in or out of center post whichever is a straighter line.
Thanks again.I may need more measurements in future.Any advice or words of encouragement also welcome.

Follow Ups:
Re: Need 155-C measurements Fred Murphy March 20, 1998 at 01:26:37(0)
Re: Need 155-C measurements Rick Black March 20, 1998 at 00:09:25(0)

E-Mail Comment to Webmaster