Posted by Joe on March 05, 1998 at 06:57:49
In Reply to: Re: What do you need?
posted by John Icenhower on March 04, 1998 at 22:32:44
: An exact, quality reproduction would be a real challenge to make and may even fall into that, "We could make it better but....." category. : John We could make it better by having the re-entrant rolled edge of the wheel welded shut thus sealing off the water catching roll that eventually rusts out.Either an entire wheel made with a closed rolled edge or perhaps replacement rolls that can be mig welded in place of a deteriorated roll. I have several condemned 21" wheels which I retain in the thought that someday someone will roll a 1/2" tube to the exact wheel diameter that can be welded to the rim to replace a rolled edge gone bad. Best regards, |