Re: WIRING

Posted by Marco on February 26, 1998 at 18:05:40

In Reply to: Re: WIRING
posted by Thomas Kane on February 26, 1998 at 11:41:12

Tom,
The cowl wiring starts at a special connector at the frame beside the steering. I follows over the steering sector housing, over the rear motor mount, into the cowl at the l/f body bolt, behind the left inclined floor board support, up behind the cowl trim cardboard, and over the top of the left cowl strainer (metal brace).
regards,
Marco

-------
: : If you can get a copy of "The Model A As Henry Built It" by DeAngeles/Francis/Henry, there's a great illustration on page 55 showing the cowl light wiring layout, including the little clamps that are held to the center of the firewall by the screws from the terminal box.
: : If you can't find the book or the picture, let me know and I'll post a copy on the Model A Ford Club of America (MAFCA) web site.
: Thanks Rick;
: What I need to know is where and how the wire passes through the firewall.
: Tom
: : ---------------------
: : Rick Black
: : Medford, Oregon USA
: : webmaster@mafca.com
: : ---------------------

E-Mail Comment to Webmaster