Posted by Dave Sturges on Sep. 24, 1998 at 12:26:01
In Reply to: Diff hints- replaycing the rear end
posted by Brian Noik- South Africa on Sep. 24, 1998 at 11:59:14
Brian, It is fairly easy to replace a rear end. A word of caution is that you'll need a quality spring spreader to remove the spring from the axle housings. Do not attempt to remove the spring shackles without taking the tension off of the spring with the spreader. The spreader ends fit into the areas just above the shackle eyes on the ends of the bottom leaf. Good luck, Dave |