Posted by DJ.Voyce on September 05, 1998 at 06:50:10
In Reply to: Tightening water outlet
posted by Jack on September 05, 1998 at 05:18:18
G'Day Jack, First off, ensure that you've got a fairly thin paper gasket or the copper cladded asbestos type. Slide the gasket down over the studs then place a paper match on both outer edges of the gasket next to the studs. Slide the outlet onto the studs & tighten down evevly to the correct cylinder head torque. Regardz DJ. OutOfAfrica A's
|