Posted by Bill on August 12, 1998 at 10:04:16
In Reply to: Rebuilding radius ball to original diameter
posted by Ken Forse on August 11, 1998 at 18:48:37
: Plan on rebuilding the radius ball to its original diameter by welding and then grinding. : Can anyone provide the original diameter of the ball when it left the factory? : Any suggestions on how I should do this? I have a great suggestion:Don't do it.You can exchange your steering arms and pitman arm for rebuilt arms from A&L Parts Specialties, in Canton, CT.They have developed a process that is strong and safe.They have a cutter that removes the ball while leavingthe stud.They then shrink a ball with a hole in it over the stud, and weld it in place.I just got a set for my car, and I have been to the plant to see how this is done.This guy has been making quality model A parts since 1963, and I have known him since 1962.Phone is 860-693-0112, or 860-693-2620 |