Re: seven tooth steering shaft

Posted by Dave Sturges on February 04, 1997 at 17:27:45

In Reply to: seven tooth steering shaft
posted by Wade Ingrham on February 03, 1997 at 16:57:58

Wade, Brattons sells an undersized lower bushing for the seven tooth sector, which means that the bottom surface has to be turned to 5/8 ". This may be enough to clean up the damage. Unfortunately, there is not an undersized bushing for the upper bearing. You may be able to find a good shaft, but as noted you'll need to press the worm off an on. you may want to also look at the sector for wear on the gear and shaft, before buying one part and then having to look for other parts. Dave.

E-Mail Comment to Webmaster