Posted by Jim Mason on November 29, 1997 at 09:10:48
In Reply to: To tow or not to tow a Model A???
posted by Jim Beley on November 28, 1997 at 17:38:36
i made a tow bar from the front bumber extensions and a piece of channel iron.rigged up a 'wishbone' from angle iron and a pintel hitch.towed jsut fine. be sure the rear end, transmission, and wheel bearings are in good shape.disconnect the rear end if you can, other wise tow in neutral.the following is a cad (crappy ascii drawing) of the tow bar O
|