Re: Sediment bowl filter/Idle adjust screw

Posted by MRR on November 25, 1997 at 07:37:09

In Reply to: Sediment bowl filter/Idle adjust screw
posted by Bryan Meade on November 24, 1997 at 22:32:33

: I'm not sure that this is the exact answer you were looking for but Walt Bratton sells a glass sediment bowl micro-filter part # A 9160-F that may work for your sediment bowl (assuming you have a glass setup).Call his establishment at 1-800-255-1929.
If you are getting that much of an effect out of opening your needle valve, you may have a problem with the the needle seat.Both the needle and seat are easily replaced on a Zenith.That is what you have isn't it?If that doesn't work then it could be one of the jets is dumping so much fuel that it is flooding out.The Zenith is an easily rebuilt carburetor.Sometimes it takes some experimentation to find the right fix for the right carburetor.That's part of the enjoyment of the A.On the other hand, if it runs ok with the needle closed, leave it alone until it needs to be fixed.My double venturi Zenith works very well with the needle closed.

Follow Ups:
Re: Sediment bowl filter/Idle adjust screw Mike Flanagan November 25, 1997 at 09:34:30(0)

E-Mail Comment to Webmaster