Re: 29 Ford Open Pickup

Posted by Bob Carabbio on November 22, 1997 at 14:30:53

In Reply to: Re: 29 Ford Open Pickup
posted by Rick Black on November 16, 1997 at 11:19:27

If it's a cut-down '29 phaeton, it'll have a rectangular panel somewhere around 8-10 inches wide extending rearward behind the front door. The rear of the panel will have 90 degree sharp edges and swing toward the center of the car for about an inch and a half then connect to the back of the front seat. The rear of the seat is rounded, and ends about 6" above the frame with a horizontal step toward the front at the bottom.There will be attachment points for hinges for the rear door in the rear of the side panels.You should be able to see the cut ends of the side sub-rails at frame level.
I'll E-mailyou a Pix of one if you like
Bob Carabbio

E-Mail Comment to Webmaster