Posted by Alex Billson on November 17, 1997 at 03:58:44
I was supplied with a jack to go with my Canadian RHD 55B Tudor. The Model A Ford judging standards book (Australian edition) does not list the jack but this may be because it does not recognise American or Canadian tools or perhaps the jack is what an Aussie would call a "ring in". Does the infobelow sound familiar to any cognozenti out there? The body is about 10 inches high with a 4 by 2 1/2 " base plate with no markings and space for a thread inside. The thread inside the body is about one inch diameter 8 TPI and about 12inches long. A small gear sits at the top and engages with the 2NX gear on the top of the body. Can anybody help? Alex Billson |