Posted by Bob Carabbio on June 03, 1997 at 21:12:15
In Reply to: Re: Oil return line
posted by marith mccoul on June 02, 1997 at 09:33:59
And speaking of oil filters - It appears that you could block the slots in the top of the oil pump pilot which allow the oil to pass up into the camshaft / drive gear area. Then take the oil out the gage port at the bottom of the block, pipe it thru a filter with a built in relief valve, and then tap a fitting back into the block just above the pump into the oil passage at the camshaft / drive gear area. Seems like a simple way to get full flow filtering with minimal modifications to the engine. What am I missing?? Bob Carabbio |