Posted by Steve Smith on April 02, 1997 at 09:05:36
In Reply to: Help:1928 carburator
posted by Paule Campbell on April 01, 1997 at 20:52:13
: I am restoring a 1928 Zenith carburator. Would like some advise: there is a little brass pin holding the lower part of the double venturi inplace, or is it just a guide? Do you have to remove the pin to take out the venturi? Any help would be appreciated. You need a double venturi for it. Removing the pin and replaceing it with a single venturi may be a mistake. It |