Re: 1930 Steering Arms.

Posted by Dave Sturges on March 27, 1997 at 12:36:22

In Reply to: 1930 Steering Arms.
posted by Bernard Barcellos on March 26, 1997 at 17:38:06

Bernard,
In addition to using the rebuilt steering arms from Brattons, I have also installed the teflon seats on the the steering arms. The wear that you have on your existing arms was caused by the metal seats rubbing on the metal balls with little or no grease to act as a lubricant. The teflon seats replace the metal cups and require little grease and will wear rather than the balls. The teflon seats could be replaced when/if needed and there should be minimal to no wear on the balls.
Dave.

E-Mail Comment to Webmaster